Filter
Top Products
18
DELETING INFORMATION
To erase an individual entry,
tap
the DELETE
button while viewing the caller ID information.
Hold
the DELETE button to delete an entry
that has both caller ID information and a voice
message.
To delete all new and old caller ID entries,
press
the DELETE button after you have
reached the "
end of list
."
To delete all new and old caller ID entries with
their voice messages,
hold
the DELETE button
after you reach the "
end of list
."
USING REDIAL
• If the area code is the same as the preset
area code, the display shows only the last
seven digits of the telephone number.
Example: 555-1234
• If the area code is different from the preset
area code, the unit shows the entire
number in the display.
Example: 317-555-1234
To activate redial:
1.
Press
the DIAL button to initiate the
callback function. The number appears in
the display as it was received.
To add or remove a "1" or the area code,
press the SKIP button.
2.
Press
the DIAL button to call the number
in the display.
3. When the unit finishes dialing, "
pick up
phone
" shows in the display.
If you do not pick up a phone within 10
seconds, the unit automatically disconnects
the line and returns to the Idle mode.