Filter
Top Products
15
1. Plug the AC power adaptor into the electrical outlet and
the DC connector into the jack on the back of the base.
2. Plug one end of the
straight telephone line
cord into the jack on
the bottom of the base.
3. Close the kick-stands
on the bottom of the
base unit if you’ve
opened them before.
4. Feed the line cord
through the groove
and plug the end into
the modular telephone
jack. Excess telephone
line can be stuffed into
the recess area on the bottom of the Base Unit.
5. Slip the mounting holes (on the bottom of the base) over
the wall plate posts and rmly slide the unit down into
place.
6. Make sure the DESK/ WALL MOUNT tab is rotated to the
WALL position.