Filter
Top Products
87
Using the Databank
4. To delete all databank entries,
highlight Erase the List in the
Databank menu and then press
EINGABE.
5. Press Y to erase all databank
entries or N to cancel the deletion.
Using a Password
You can use a password to prevent
unauthorized access to the databank.
Warning! Always write the password in
a safe, separate location. If you lose or
forget the password, you will be able to
use the databank again only by
removing the batteries from your LDE-
1660, which will permanently erase all
the information stored in the databank.
1. Press and DATA (F2).
Using the Databank
2. Highlight Set password and then
press EINGABE.
3. Type a password of up to eight
characters and press EINGABE.
Use to move the cursor; use
to delete.
4. Press C to confirm or CLEAR to
cancel the password.
The password you set will be
requested the first time that the
databank is used during a session.
5. To change the password, repeat
Steps 1-4.
To remove a password, press
EINGABE at the blank password
screen.
ZUR