Filter
Top Products
Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
66 Personalizing the base station
If you include a pause in a telephone number, there is a pause during dialling
at that point to wait for the dial tone. The base station automatically inserts a
dial tone pause before each telephone number. You can adjust the length of the
pause.
The standard pause is 1 second. You can set this from 1 to 10 seconds:
Route:
BaseStation » Settings » Basic » PhoneLine » Pause
1. Select
Basic
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
Pause
and press YES.
The current pause length is displayed.
4. Enter a number (1 - 10) to set the length of the pause in seconds.
5. Press
YES to confirm.
The dial tone pause has now been changed.
To include a pause in a telephone number, press
for one second. A dash
marks the pause. The base station waits for the dial tone for the length of the
dial tone pause.
You can clear all settings on the base station simultaneously (including those
of the answering machine). The pin code and the subscriptions, however, are
not cleared.
All settings revert to default.
To reset all base station settings:
Route:
BaseStation » Settings » Basic » MasterReset
1. Select
Basic
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
MasterReset
and press YES.
Reset All Settings ?
is displayed.
4. Press
YES to confirm.
All base station settings are cleared.
DIAL TONE PAUSE
CLEARING ALL BASE STATION SETTINGS