Filter
Top Products
Client specific solutions
Today it is more important than ever that there is a flexible approach to meeting client requirements.
ecom instruments offers this flexibility for clients projects - large or small. Not all projects require a high number of units
and need only an individual and customised solution. Small challenging solutions in particular demand dedicated application. On
this and the following pages we showcase the versatility of the i.roc’s x20 by the way of client projects that have already been
achieved. Many of these solutions are now part of our standard portfolio.
Contact us. We are more than willing to give you further information in a personal conversation.
868 MHz radio module
Here, one of the main problems was the installation of an omni- directional rod
antenna. In addition, it was interesting that the radio module that was to be used,
was bigger than a certain mechanical size, which made it impossible to fall back
on the previous solution. Finally, the project was realised by the vertical instal-
lation of the blanks and the mechanical protection of the antenna. In addition,
the radio module was of a size and dimensions that meant it was neccessary to
re-design the casing.
CAD production drawing
Non-Ex: Class 1 Bluetooth Module
High scope if a radio contact is used, global use without national restrictions
as with WLAN 802.11b, total robustness and interference resistance, combined
with a PDA that is easy to use – that was the profile of demand when the project
was started. All this was put into practicse by the way of installation of a Class 1
Bluetooth radio module. The Bluetooth interface still is one of the most secure
radio contacts, it can be switched to „invisibility”-mode and cannot be „seen” by
anyone anymore and changes the frequency 1600 times per second in the 2.4
GHz band, which is approved all over the world.
MCT202 - HART
®
/DE Modem
ecom instruments developed for Honeywell the intrinsically safe
Configuration and Maintenance Tool for HART
®
or DE protocol enabled
pressure or temperature transmitters. Comprising of the industrial PDA PC i.roc
627 complete with integrated HART
®
/DE Modem and software applications MC
Toolkit and SDC 625.
Variety via flexibility
This is only a selection of options that have already been realised. Also for you and your application ecom instruments can
be the flexible partner for the realisation of such a solution.
Note:
Some of the solutions that have been presented on this site and solutions given have not been developed for hazardous locations.
For application in hazardous locations only those modules with the designation „Ex“ in the title (for example BC x10 -Ex) are
allowed to be used.