Filter
Top Products
English
EN 10
Other
Alarm settings
When the alarm clock is activated will be displayed in the standby mode.
Once the alarm clock goes off a tone will be heard for one minute, to switch off
the alarm press any button on the telephone.
1. Press and hold
v
until the alarm setting ashes.
2. Scroll to the required function (off/on/repeat daily) using
v
/
V
. Press
0
.
To cancel the alarm, proceed to point 5.
3. Select the hour (00-23) using
v
/
V
. Press
0
.
4. Select the minute/s using
v
/
V
. Press
0
repeatedly to return to standby mode.
5. To cancel the alarm while it is sounding, press
0
or lift and replace the
handset.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment that may be connected. If the problem is
resolved, the fault is with the other equipment.
Test the equipment on a known working line. If the product works then the
fault is with the line. Please inform your local telephone company. Check that
charge contacts in handset and base unit are clean
No number shown in display when ringing
- In order for this feature to function, you must subscribe to the Caller ID
service from your network provider.
- If a text message is shown on the display, the call may be an international
call (no data received), or from a private or withheld number.
- It may not be possible to receive Caller ID information if the phone is
connected to a PBX system.
If the telephone still does not work, contact the place of purchase. Don’t forget
the receipt or a copy of the invoice.