Filter
Top Products
English
Connection
1. Connect the curly cord to the handset and to the socket
marked
q
on the underside of the telephone.
2. Connect the telephone line cord to the socket marked
T
on the underside of the telephone, and then to a telephone
network wall socket.
3. You will hear a click when the modular plug is correctly in
place.
4. Lift the handset and listen for the dial tone. Your telephone is
now operational.
5. Australia/New Zealand only: Ensure that the recall button
timing switch underneath the telephone is correctly set (100
ms AUS or 600 ms NZ).
Mute button
Press and hold
z
to disable the handset microphone, release
z
to
reconnect the microphone.
Redial function
When the number dialled is engaged or if you wish to redial the
last number dialled, lift the handset and press
r
.
Volume control
The handset earpiece volume may be adjusted using located
on the side of the telephone.
Ringer
The ringer volume can be adjusted to high or low using
located on the underside of the telephone.
Recall
Access to additional network services such as “Call Waiting” can
be gained by using the recall button
R
. Example: when the call
waiting tones are heard, press
R
, listen for the dial tone, then
press 2. Please note that some networks require only the
R
button
to be pressed, contact your network operator for more services
information.
If this product is connected to a business PBX system, press the
recall button
R
followed by the extension number to transfer a
call. The standard setting is 100 ms for UK/Australia and 600 ms
for New Zealand.