Filter
Top Products
2
Connecting the DVC-2000 VideoPhone
A. Place the DVC-2000 VideoPhone in a location where you can easily connect
to a phone jack, power outlet, and to your router or gateway.
B. Attach the supplied Ethernet cable (blue) to the blue colored port labeled
ETHERNET on the DVC-2000 and connect the other end to your Ethernet
network device (hub, switch, router, or broadband modem).
C. Attach the supplied standard telephone cable (grey) to a telephone wall
jack and connect the other end to the grey port labeled PHONE on the
DVC-2000.
D.
Optional: If you want to use a television instead of the built in video display
screen, connect the supplied yellow and white RCA cables to the yellow
and white RCA connectors on the DVC-2000 and to the matching
audio/video jacks on the television or VCR.
Note: You must toggle the TV/LCD switch on the side on the unit if you want
to use the television output.
E. Plug the supplied AC power cable into an AC outlet and then connect the
other end to the DVC-2000.
D B C E