Filter
Top Products
9
Installation
Desk Mount
1. Connect the power adapter. The power adapter connects to the
round jack on the bottom of the base. Plug the large part of the
adapter into the wall outlet. Use only a 6V DC 350mA, center
positive Class 2 adapter.
2. Connect the line cord. The line cord conncects to the telephone
line jack on the bottom of the base.
3. Ensure that the batteries are installed in the handset by removing
the battery cover.
4. Place the handset on the base.
Wall Mount
1. Connect the power adapter and the line cord. See Steps 2 and 3
above.
2. Mount the base on the telephone wall jack.
3. Ensure that the batteries are installed in the handset by removing
the battery cover.
4. Place the handset on the base.
Initial Setup
After installing the phone, you should configure it for your location.
To do this, you will need to set the local area code and the time and
date. There are several other settings that you may wish to modify. All
of these are contained in the SETUP menu which is discussed in detail
on the following pages.