Filter
Top Products
9
INSTALLING YOUR TELEPHONE
• Adjust the wall mount clip, located on the face of the housing,
by lifting up the clip and rotating it 180 degrees.
Complete the Desk/Wall mounting by installing the handset and
handset cord.
CHECK FOR DIAL TONE
Lift the handset and listen for dial tone.
• When you hear dial tone, your telephone is ready to use.
• If you do not hear dial tone, refer to the Telephone Service
Problems part of your manual.
BEFORE USING Y OUR TELEPHONE
1. Set the ringer volume control. If the control is set to OFF,
you will not hear the ringer when someone calls you.
2. Your telephone has a TONE-PULSE switch. Set the switch
to match the dialing service from the telephone company.
• If you have pulse service, set the Tone-Pulse switch to
PULSE.
• If you set the switch for TONE service, you must have
TONE service or you cannot dial.
• If you set the switch for PULSE service and you have
TONE service, you can dial numbers, but you cannot use
distant services, such as bank-by-phone, unless you press
the TONE button.
MAINTENANCE INFORMATION
Treat your telephone with care for trouble-free performance.
Avoid dropping the handset. Carefully place the handset on-hook
after use.
Clean your telephone with a damp cloth. Stains may be
removed with a mild soap. Do not use liquid or aerosol detergents
or cleaning agents.