Filter
Top Products
19
CALLER ID ON CALL WAITING
Call-waiting service alerts you to a new call by playing a tone while you are on a call.
Call Waiting Caller ID not only tells you there is another call waiting, but lets you know
who the caller is before the call is answered. The name and number of the incoming call
will be shown on the display.
Press FLASH to place the first call on hold and answer the new call. Press FLASH
again to return to the first call.
REVIEWING CALLS
1. While on hook, press or to see the stored calls. The 9120 stores up to 99 calls.
2. When the end of the call records is reached, the display will show [END OF LIST ].
DELETING CALLS
If more than 99 calls have been received by the 9120, the oldest records will be dropped
to make room for the new calls. To prevent this, calls can be manually deleted. Indi-
vidual calls can be deleted or all calls can be deleted. To delete calls, follow the
instructions below.
1. While on hook, press or to see the stored calls.
2. With the desired call displayed, press DELETE.
3. The display shows DELETE ?
4. Press DELETE or ENTER to delete the number. Press any other key to exit.
To delete all calls follow the instructions below.
1. While on hook, press or to see the stored calls.
2. With a call displayed, press and hold DELETE.
3. The display shows ALL DELETE ?
4. Press DELETE to delete all the numbers. Press any other key to exit.
CALL BACK
It is possible to dial directly from the display.
1. While off hook, press or to see the calls.
2. With the desired call displayed, press ENTER to dial out the number. If an Area Code
was entered during the unit setup, the # key can be used to change the dial format
between 7, 10 and 11 digits. With the number displayed, press # to add a 1 for long
distance. Press # again to display only 7 digits for local dialing. Press # again to return
to 10 digits.
Numbers can also be selected while on hook. They will be dialed when the phone is
taken off hook.