Filter
Top Products
8
INSTALLING YOUR TELEPHONE
POSITION THE CRADLE TAB
To position the cradle tab for the type of installation
desired, refer to the diagram.
• Apply upward pressure on the serrated area to loosen and
remove the cradle tab.
• Rotate the cradle tab for the desired position. The tab should
be up for hanging the handset in a wall installation or down for
a desk installation.
• Apply downward pressure on the serrated area to lock the
cradle tab in place.
CHECK FOR DIAL TONE
Lift the handset and listen for dial tone.
• When you hear dial tone, your telephone is ready to use.
• If you do not hear dial tone, refer to the Telephone Service
Problems part of your manual.
DIRECTORY CARD
Remove the clear plastic cover from the directory card
tray, and remove the card. Record your frequently called and
emergency telephone numbers. Place the card into the tray and
reinstall the plastic cover.