Filter
Top Products
RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will show
the NEW symbol, the phone number, the callers name, and time and date of the call
for 20 seconds. The RPT (repeat) symbol will appear if the call has come in more
than once.
2. After 20 seconds with no activity, the display will default to the Stand-By screen
and remain on until another call is received or a button is pressed. This will show
you the total number of calls stored and how many new calls have not been
reviewed.
REVIEWING CALLS
1. When the NEW Call LED is flashing , you have new incoming
calls. Next to the NEW symbol is the total number of new calls. Press the REVIEW
UP (
) or REVIEW DOWN ( ) button to review the incoming stored calls.
2. The NEW symbol attached to each call will be removed after you review the call.
3. If the NEW symbol is still flashing when the display goes back to the Stand-By
screen, there are new calls that you have not yet reviewed.
4. The reviewed number can be stored into any of the auto memory buttons or
keypad memory locations by pressing the MEMO button first (at least two sec
onds), then press the MEMO button and the desired memory location.
5. When you have reached the end of the call records, the display will indicate [-END
OF LIST- ] , confirming there are no more stored calls.
15
123 456 7890
JOHN SMITH
1:23
PM
1/2
CALL #
01
1:23
PM
1/2
TOTAL: 01 NEW: 01