Filter
Top Products
17
7. To reboot the 2757, press ‘Down’ to move to ’21. Reboot System’, and press ‘Select’.
‘Rebooting’ will appear on the LCD screen. After the reboot is completed, the 2757 is
ready for use.
2.4 Network Setup (Web Configuration)
You can also configure the network by using a web browser. In order to do this, you must first
know the IP address of the 2757. If you are using PPPoE or DHCP, please follow the instructions
below to get the IP address.
2.4.1 Display IP Address
1. Press ‘Menu’
2. Press ‘Up’ or ‘Down’ until ‘3. Settings’ is selected, then press ‘Select’.