Filter
Top Products
HANDSFREE BUTTON
The Handsfree button (HF) is used to go off-hook without lifting the handset. The
headset can be turned on and off by using the handsfree button.
SPEAKER VOLUME
Use the handsfree Speaker Volume slide control located on the right side of the
phone base to change volume control handsfree. This increased volume should allow
persons with hearing impairments to carry on normal conversations by adjusting the
receive volume to its proper level.
RINGER VOLUME
Use the Ringer Volume controls located on the right side of the phone base to change
ringer volume for Line 1 and Line 2. The 3-position switches are used to set ringer
volume Off, Low or Hi. Remember to set the Ringer switches to Hi or Low when you
want to receive calls.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation. The
MUTE Indicator will light up and remain lighted until you resume your conversation. To
resume your conversation, press MUTE. The MUTE indicator will go out and your call
can continue.
CONFERENCE BUTTON
1. To establish a three-way conference call, press HOLD while talking on one line.
The first conference person is on Hold, the HOLD LED will light.
2. Press Line 1 or Line 2 whichever is not being used. Listen for dial tone. Dial the
telephone number of the second person.
3. Press the conference button. You may now speak to the first and second person
simultaneously.
Note: The first person is automatically released from hold after
pressing the conference button.
4. Replace the handset in the cradle to disconnect both lines. To stay connected to
only one line, press the desired line. The other line will be disconnected.
5. After conference call, press Line 1 or Line 2 to cancel conference call.
13