Filter
Top Products
12
TELEPHONE FEATURES
PULSE AND TONE DIALING
1. If your telephone line accepts touch-tone dialing, set the PULSE/TONE switch to
the Tone position.
2. If your telephone line requires rotary (pulse) dialing, set the PULSE/TONE
switch to the Pulse position.
3. If you are unsure which system you have, set the switch to the TONE position and
lift the handset. When you get a dial tone, dial a telephone number. If the dial tone
continues, move the switch to PULSE, and then dial the telephone number again.
Note: In order for the Caller ID callback to work (see Using the Caller ID Function), you
must set the PULSE/TONE switch to the Tone position.
RECEIVING A PHONE CALL
1. Be sure the RINGER switch is set to the HI or LOW position.
2. When the phone rings and the caller’s information shows on the display window,
lift the handset or press the SPEAKERPHONE button and begin your conversation.
3. Set the Ringer switch to the OFF position when you do not want to be interrupted
by the phone ringing. Remember to set the ringer switch back to Hi or Low when
you want to receive calls again.
PLACING A PHONE CALL
1. Lift the handset or press SPEAKERPHONE and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the display
window.
SPEAKERPHONE (AC Adaptor must be used to ensure proper function)
1. Receiving Incoming Calls
a. When the phone rings, press and release SPEAKERPHONE and talk normally
into the built-in microphone from a distance of 5-6 inches.
b. You can adjust the volume of the caller’s voice by sliding the VOLUME
CONTROL on the right side of the phone.
c. After the conversation has finished, press SPEAKERPHONE to hang up.