Filter
Top Products
•
To respond when your Tracker Pager displays park orbit dialing
code,
1. From any system station, press INTERCOM.
2. Dial displayed orbit code (# 91–99).
3. Retrieve call.
7.3 Pulse/tone Switching
If the local telephone service is pulse (rotary), convert to tone while
dialing as follows:
press # at point in dialing sequence where conversion to tone is re-
quired.
NOTE: Pulse/Tone switching can be programmed into speed dial
numbers by pressing # during number storage.
7.4 Using Call Forwarding
•
To forward personal calls to another telephone,
1. Lift handset. Listen for intercom dial tone.
2. Dial ✳ 05,
3. Dial extension number of station to which calls are to be
forwarded.
•
To cancel personal call forward,
1. Lift handset and listen for intercom dial tone.
2. Dial #05.
•
To forward all calls to another telephone,
1. Lift handset and listen for intercom dial tone.
2. Dial ✳ 5.
3. Dial extension number of station to which calls are to be
forwarded.
GCA70–246 Using The Other Telephone Features
SingleLineStationUser'sGuide 7–3