Filter
Top Products
DigiTech Station User’s Guide
Using the Messaging Feature
GCA70-280
NOTE: You
can set system-supplied messages to be displayed at the caking LCD
speakerphone.
l
To turn LCD messaging on
1. press
ITCM,
2.
dial +#02,
3.
choose MSG,
4. press
SPKR.
l
To retrieve a message,
1. observe flashing message-waiting light,
(HOLD
light)
2. lift handset,
3. press
ITCM,
then press
HOLD;
connection to message desk is
automatic.
l
To activate station-to-station messaging (station must
have BLF appearance at called station),
1. make intercom call and hear ring-back tone,
2. dial * 7; your station’s BLF light turns on at called station,
3. hang up handset.
l
To cancel station-to-station messagin,
1.
press ITCY and dial P 7,
2. dial extension number of station where you left the call-back indica-
tion,
3.
press SPKR.
Using the Recall/Flash Feature
l
If your system has been configured for flash,
press
TAP
to generate a timed flash signal while on line.
l
If your system has been configured for recall,
press
TAP
to disconnect as if you had hung up.
10