Filter
Top Products
Customer Assistance WarrantyIntroduction
13
Nothing comes close to a Cobra
™
OperationOperation
12
English
Product Features
To Scan Privacy Codes:
1. While in Standby Mode, press the Channel Up
or Channel Down button to choose the main
channel you wish to scan.
2. Press the
Mode button until the Scan icon and
the privacy code number flashes on the display.
3. Press the
Channel Up or Channel Down button
and your radio will begin scanning privacy
codes within the main channel you selected.
4. The Scan icon will continue to be displayed
when Scan is On. Your radio will continue
to scan privacy codes and stop an incoming
transmission is detected. Your radio will remain
on that channel and privacy code for ten (10)
seconds. During this time, you can:
a. Press and hold the
Talk button to
communicate with others. Your radio
will remain on that channel and privacy
code and return to
Standby Mode.
b. Press the
Channel Up or Channel Down
button to resume scanning privacy codes.
c. Press the
Mode button to proceed to
other functions.
If you press the
Talk button while scanning,
and not within ten (10) seconds of receiving
a transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning privacy codes.
10 Call Tone Settings
•
You can choose between ten (10) different call
tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the Mode button until the letter “C”
and the current call tone number (1 through
10) is displayed. The current call tone will
sound for one (1) second.
2. Press the
Channel Up or Channel Down
button to hear the other call tone settings.
3. a. Press the
Mode button to enter the new
setting and proceed to other functions.
b. Press the
Lock button to enter the new
setting and return to
Standby Mode.
“Roger Beep” Confirmation Tone
•
Your listener will hear an audible tone when you
release the
Talk button. This alerts the other party
that you are finished talking and it is
OK for them
to speak. This feature can be turned On or Off.
To Turn “Roger Beep” On or Off:
When turning On your microTALK
®
radio
for the first time, “Roger Beep” will be On.
1. Press the
Mode button until the Roger
Beep icon flashes. The current On or
Off setting is displayed.
2. Press the
Channel Up or Channel Down
button to select “Roger Beep” On or Off.
3. a. Press the
Mode button to enter the new
setting and proceed to other functions.
b. Press the
Lock button to enter the new
setting and return to
Standby Mode.
The setting you select will be saved when you
turn your radio Off and On again. When the
“Roger Beep” is On, the “Roger Beep” icon
will be displayed.
Channel Button
Mode Button
Select Channel
Scan Privacy Codes
Call Tone Setting
Mode Button
Channel Button
Roger Beep Off
Mode Button
Channel Button