Filter
Top Products
Customer Assistance WarrantyIntroduction Operation
While setting a memory location, if you do not press any buttons
for 15 seconds, your radio will automatically return to Standby
mode on the channel/privacy code displayed before you entered
mode functions.
To Recall A Stored Memory Channel Location:
1. Press the Mode button until the Memory
icon and the memory location number flash
on the display.
2. Press the Channel Up or Channel Down
button to select a memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Talk button to return to Standby
mode on the selected memory location.
Pressing the Lock button will put
you in “program a memory location.”
While recalling a stored memory
location, if you do not press any
buttons for 15 seconds, your radio will
automatically return to Standby mode
on the channel/privacy code displayed
before you entered mode functions.
10
English
Mode Functions
Ten (10) Memory Locations
•
Your microTALK
®
radio has Ten (10) Memory Locations for storing
your most frequently used channels and channel/privacy codes.
These Memory Locations can be selected individually or can be
scanned. (See page 17 for memory location scan.)
To Program A Memory Location:
1. Press the Mode button until the Memory icon
and the memory location flash on the display.
2. Press the Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Lock button to enter a new memory
location or edit an already programmed
memory location. The channel numbers
will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Lock button. The privacy code
numbers will flash on the display.
6. Press the Channel Up or Channel Down
button to select a privacy code (0 to 38).
7. Choose one (1) of the following:
a. Press the Lock button to enter the channel/privacy code
in the selected memory location and return to the beginning
of memory location options.
b. Press the Mode button to enter the channel/privacy code in
the selected memory location and proceed to other functions
on the channel/privacy code displayed before you entered
mode functions.
c. Press the Talk button to enter the channel/privacy code in the
selected memory location and return to Standby mode on the
selected memory location.
Operation
Lock Button
Memory Icon
Mode Button
Channel Button
11
Nothing comes close to a Cobra
™
Memory Icon
Mode Button
Channel Button
3100-PDF VERSION.qxd 11/20/03 10:41 AM Page 10