Filter
Top Products
Customer Assistance WarrantyIntroduction
13
Nothing comes close to a Cobra
™
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
12
English
Mode Functions
During privacy code scan (while receiving an incoming
transmission), you can choose from the following:
a.
Press and hold the Talk button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to
Standby mode.
b. Press the Channel Up or Channel Down button to
resume scanning privacy codes.
If you press the
Talk button while scanning and not within
10 seconds of receiving a transmission, you will transmit
on the channel/privacy code on which you last received a
transmission. This will return the radio to
Standby mode.
If you do not press any button within 10 seconds, your radio
will automatically resume scanning privacy codes.
During privacy code scan (while not receiving a transmission),
you can choose from the following:
a.
Press and hold the Talk button to communicate on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
This will return the radio to
Standby mode.
b. Press the Mode button to proceed to set VibrAlert
®
and/or Call Alert (see page 14 for further details).
c. Press the Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Privacy Code Scan
•
Your microTALK
®
radio can automatically scan the
Privacy Codes (00 through 38) within one channel.
To scan privacy codes:
1. While in Standby mode, press the
Channel Up or Channel Down button
to choose the channel on which you
wish to scan privacy codes.
2. Press the Mode button until the Scan icon and
the privacy code numbers flash on the display.
3. Press the Channel Up or Channel Down
button to begin scanning privacy codes
within the channel you selected.
The
Scan icon will continue to be displayed when
privacy code scan is
on. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain
on that channel/privacy code for 10 seconds.
While setting privacy code scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to
Standby mode on
the channel/privacy code that was displayed
before you entered mode functions.
Channel Button
Mode Button
Select Channel
Scan Privacy Codes