Cobra Electronics LI 6000WXC Two-Way Radio User Manual


 
Customer Assistance WarrantyIntroduction
13
Nothing Comes Close to a Cobra
®
Operation
12
English
Mode Functions
Operation
10 Memory Locations
Your microTALK
®
radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These
Memory Locations can be selected individually
or can be scanned. (See page 21 for memory location scan.)
To program a memory location:
1.
Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Lock/Enter button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Lock/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
Lock/Enter Button
Memory Icon
Channel Buttons
Mode Button
Voice Activated Transmit (VOX)
In VOX mode, your microTALK
®
radio can be used “hands-free,”
automatically transmitting when you speak. You can set the
VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX mode on or off:
1.
Press the Mode button until the VOX icon
flashes on the display. The current
on or
off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn VOX on or off.
3. Choose one of the following:
a. Press the Mode button to enter the
selected
on or off setting and proceed
to other functions.
b. Press the Lock/Enter button to enter
the selected
on or off setting and return
to
Standby mode.
To set VOX sensitivity:
1.
Press the Mode button until the VOX icon
flashes and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters “LE” and a Number 01
through 03, with Number 03 being the
most sensitive level and Number 01
being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Lock/Enter button to
enter the selected setting and return
to
Standby mode.
VOXSensitivity Level
Mode Button
Channel Buttons
VOX Icon
Mode Button
Channel Buttons