Filter
Top Products
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when
you release the
Talk button. This alerts the other party that you
are finished talking and it is OK for them to speak.
To turn roger beep on or off:
1.
Press the Mode button until the
Roger Beep icon flashes on the display.
The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode button to enter
the new setting and proceed to other
functions.
b. Press the Lock/Enter button to enter the
new setting and return to
Standby mode.
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound
beeps each time you press a button or change a setting.
To change keystroke tones:
1. Press the Mode button until the Keystroke
Tones
icon flashes on the display. The
current
on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn keystroke tones on or off.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and return to
Standby mode.
b. Press the Lock/Enter button to enter the
new setting and return to
Standby mode.
VibrAlert
®
and Call Alert
•
Your microTALK
®
radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently or both.
To change call settings:
1. Press the Mode button
until the
Call Setting icon
flashes on the display.
The current setting (“01”
vibrate + ring, “02” vibrate
only or “03” ring only)
is displayed.
2. Press the Channel Up or
Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode button
to enter the new setting
and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to
Standby mode.
10 Call Tone Settings
•
You can choose from 10 different call tone
settings to transmit a unique call alert.
To change a call tone setting:
1. Press the Mode button until the
letter “C” and the current call tone number
(01 through 10) is displayed.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock/Enter button to enter the
new setting and return to
Standby mode.
24
25
Mode Functions
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Customer Assistance WarrantyIntroduction
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Roger Beep On
Keystroke Tones On
Mode Button
Mode Button
Call Tone Setting
Mode Button
V
ibrAlert
®
+
Ring
VibrAlert
®
Only
Ring Only
M
ode Button
LI 7300
Channel Button
LI 7300
Channel Button
LI 7300
Channel Button
LI 7300
Channel Button