Filter
Top Products
continued
5
InstallationInstallation
Quick Set-Up Guide
Note
The battery must be charged at
least 12 hours before use.
Replacement batteries are
available direct from Cobra.
See Accessories section on
page 48.
4
Quick Set-Up
Guide
Connect round connector into power jack on
base. indicator on base will flash rapidly.
Connect power adapter in outlet.
2
3
Install Ni-Cad battery in the handset.
To remove the battery door,press and slide
downward.
Observe connection orientation, connect the
battery and replace the door. The indi-
cator will blink until the handset is placed in
the base and power is applied to the base.
1
Place handset on base so indicator lights.
indicator will stop flashing.
Raise antenna to vertical position.
4
5
Low Batt
In Use
In Use
Charge
CP9135 manual layout.6 10/20/98 12:41 PM Page 10