Cobra Electronics 2500 Cordless Telephone User Manual


 
Using Your Phone
After charging the handset batteries overnight (at least 12 hours), your
Cobra
Intenna
cordless phone will be ready for use.
ANSWERING/PLACING CALLS AT THE BASE
¥ To answer a call, just pick up handset from base when the phone rings.
The TALK button and TALK indicator will automatically light. When call
is completed, return handset to base without pressing TALK button; your
phone automatically disconnects.
¥ To place a call, pick-up handset from base and press and release the
TALK button (indicators will light). When you hear the dial tone, place
your call.
ANSWERING/PLACING CALLS AWAY FROM THE BASE
¥ The TALK indicator must be off (not lit) when the handset is away from
the base. The phone is ready to
ring if a call is received (RINGER
Switch on the base must be in
ON position).
¥ Press and release the TALK but-
ton (indicators will light) to
answer or place a call.
¥ Press and release the TALK but-
ton when finished with a call.
TALK indicators will go off and
the call will be disconnected.
8
Talk
9
6
3
8
5
2
A
B
C
J
K
L
T
U
V
G
H
I
D
E
F
M
N
O
W
X
P
R
S
7
4
1
Note: The advanced channel scanning technique employed by the
CP-2500 ensures that a clear channel is chosen. The TALK button
flashes during scanning. In the presence of radio interference (such as
another cordless telephone or baby monitor in the area) there may be
a slight delay in accessing the line when placing a call.