Filter
Top Products
BATTERY PACK
Insert (6) new “AA” Alkaline batteries (not
provided) into the battery cartridge. To
install batteries, (1) remove the battery
cartridge from the unit. (2) Lift the tab on
top of the battery pack and separate the two
halves. (3) Install the batteries according to
the polarity markings provided on the
cartridge. Note: Incorrect battery installation
can damage the batteries and cartridge.
Slide on Battery pack until secure.
Alkaline batteries:
Top grade Alkaline batteries
should be used.
9
8
M.
OPERATION
TURNING ON/SQUELCH
TURNING YOUR
HANDHELD CB ON
Rotate the power ON-OFF
Volume Control clockwise.
Open the squelch by fully
turning counterclockwise
and adjust the volume to
a comfortable level.
SETTING THE SQUELCH
Think of your squelch control
as a gate for incoming signals.
If you turn the squelch control
fully clockwise, you effectively
close the “gate” and no signals
will pass through. If you turn
the squelch control fully
counterclockwise, you
open the gate and all
signals come through.
To achieve the Desired Squelch
Setting (DSS), turn the squelch
control counterclockwise until
you just hear noise. Then turn the
squelch control back clockwise
just until the noise stops. This
DSS setting only lets strong
signals through.
ANTENNA
Attach antenna securely
by turning clockwise.
M.
GETTING STARTED
**See Accessories
on page 23
for rechargeable
battery pack option.
Nickel Cadmium (NiCad) Batteries:
Batteries with 700 mAh minimum
recommended. Top Grade NiCad batteries
can be ordered direct from Cobra. See
page 23 for details.
(1)
(2)
(3)
TAB
45WX.MANUAL.9/97.qx 9/26/97 2:38 PM Page 9