Filter
Top Products
11
Nothing Comes Close to a Cobra
®
English
10
Operation
OperatingYour Handset
Operation
OperatingYour Handset
Operation
•
Once the Cobra Bluetooth handset has been paired with a cell phone, incoming calls
can be answered and outgoing calls can be made.
Standby
While waiting to receive or make a call, the handset will be in Standby mode.
The upper part of the screen shows the Waiting For A Call
icon and the cell phone signal strength.
The Function buttons (from left to right) will activate display
of the Volume screen, the Menu screen, the Call Log screen
and the Phonebook screen.
The Up and Down Arrow buttons will also adjust handset
speaker volume directly while in Standby or during a call.
Incoming Call
When the active paired cell phone receives a call, the ring tone will sound and it will
be announced on the handset screen.
Ringing
The call can be answered by pressing either the Answer
Function button or the Green Phone button.
If the Ignore Function button is pressed, the call will not
be accepted, but will be recorded in the Call Log.
Answered Call
The Mute Function button will disable the microphone,
but allow you to continue to hear the calling person.
To end the call and return to Standby mode, press either
the End Function button or the Red Phone button.
Caller information like name and number of the incoming
caller will only be shown if it is available on your network
and/or device.
Call Waiting
When a second call rings during an active call, it will be announced on the
handset screen.
To Answer the Waiting Call:
1. Press the Answer Function button. The waiting call
will become active, the first call will be put on hold.
Outgoing Call
Outgoing calls can be initiated in three ways:
■
By selecting a Phonebook entry.
■
By selecting a Call Log entry.
■
By dialing the number using handset Function buttons.
Phonebook
After adding a number to your Phonebook, you can go to the Phonebook and select
it from the available numbers to be dialed.
To access a number in the Phonebook, press the Menu Function button in Standby
mode, then select the Phonebook mode to arrive at the screen shown.
To Select and Dial a Number:
1. Use the Page Up and Page Down buttons to shift up and
down the list of entries.
2. Use the Up and Down Arrow buttons to scroll the pointer
at the left of the screen to the desired entry.
3. Press the Green Phone button to call the number.
CONNECTED
+1 555 566 1234
MUTE
END
Answered Call Display
INCOMING CALL
+1 555 566 1234
ANSWER
IGNORE
Incoming Call Display
VOL
M
ENU
LOG
CONT
PAIRED TO
X
XX
Standby Mode
BILL CELL
NATALIE
NAT CELL
EDIT
PG
PG
1
2
3
BILL DESK
4
ADD NEW
EXIT
NEW
Phonebook
Select and Dial a Number
INCOMING CALL
+1 555 566 1234
ANSWER
IGNORE
CallWaiting Display
BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 10