MAX IP User’s Guide 3
TO MUTE DURING RINGING
1. Press the star (*) or the
MUTE
key to mute the ringer for the duration of the ringing.
> Note: This only mutes the current ring; the ringer is unmuted for subsequent calls.
TO ADJUST RINGER VOLUME
1. While the phone is ringing, press VOLUME UP or VOLUME DOWN.
2. While the phone is inactive, press
VOLUME UP or VOLUME DOWN. The ringer melody plays once at the new
level.
TO ADJUST LOUDSPEAKER VOLUME
1. Press the VOLUME UP key while on a call to increase volume.
2. Press the
VOLUME DOWN
key while on a call to decrease volume.
TO ACCESS YOUR HELP LINE
1. While in Standby mode, press and hold the 0 key for 2 seconds. This feature must be programmed before
use.
TO STORE A NUMBER IN THE PHONEBOOK
1. Enter the number while the phone is in standby (inactive) mode.
2. Press and hold the
PHONEBOOK key until the Phonebook and Program icons appear.
3. Assign a Phonebook location (
0–9) by pressing the corresponding number key.
4. Press
PHONEBOOK again to save the entry. You hear a confirmation tone.
5. To exit Phonebook Edit mode before saving the entry, press
CLEAR
.
TO MAKE A CALL USING THE PHONEBOOK
1. Press the
PHONEBOOK
key.
2. Press the number (
0-9) that corresponds with the stored phone number you want to dial. The number is
displayed on the LCD screen.
3. Press the
ON/OFF
key to dial the number.
TO MAKE AN OUTBOUND THREE-WAY CALL
1. Press the CONFERENCE key. The first party is put on hold and you are connected to a second line dial tone.
OR press the
HOLD
key to place the current call on hold, then press
ON/OFF
key to obtain the second line.
2. Dial the second party’s phone number.
> Note: Stored numbers are not available for dialing a second party.
If you receive a busy signal or are routed to voicemail, then press the
ON/OFF key to terminate the call and
return to the first party.
3. Press the
CONFERENCE key to join all three parties in a conference call.
FIGURE 5 MAX IP phonebook and program icons