Filter
Top Products
Installation
Your Wake & Shake offers you the option of using it as both an
alarm clock and a telephone ring signaler. The following diagram shows
you how to set up your Wake & Shake so you may use it for both.
NOTE: Setting up your Wake & Shake as a tele-
phone ring signaler requires the use of a
dual
phone jack adapter. This is a small inexpensive
device available at your local drug or hardware
store. (See #1)
1.Plug Dual Phone Jack Adapter into wall jack.
2.Plug telephone line from your telephone into one jack on adapter.
3.Plug one side of line cord (included) into phone jack on the back of
the clock and the other into the available jack on the adapter.
4.Plug the AC power adapter into the adapter jack on the back of the
clock.
5.Plug the AC power adapter into an electrical wall outlet.
6.Plug the Bed Shaker into the jack in the back of the phone.
Now your Wake & Shake is ready for use. Simply set the time &
alarm and you are ready to go.
CS-WS1manual.pm 2/5/04, 20:074