Filter
Top Products
Page 10
#25
800-965-9043
ClearSounds
SAVE TO?
#00
ENTER NUMBER>
#00
8009659043
USE SAVE TO END
SAVE TO?
Storing a New Number and Name in the Memory Buttons
To store a new number and name in the memory
buttons:
1. Press the Save button when the display shows no
caller’s number or name. The “SAVE TO?” prompt
appears on the display.
2. Press the memory button where you wish to store
this telephone number (e.g., M1). The “ENTER
NUMBER>“ prompt appears on the display.
3. Use the keypad to enter the telephone number,
including the long distance prefix that you need to
dial this number. Insert a pause or multiple pauses
where required by using the Pause button. Then
press the Save button.
4. The display will read “PROGRAMMING OK!”.
Copying the Caller’s Number and Name to a Memory Button
When the caller’s number and name you wish to store in a
memory button is displayed during CALLER ID review,
press the Save button. The 3
rd
line of the display indicates
“SAVE TO?”.
You can save this caller’s number and name into a memory
button by pressing the desired memory button (e.g., M1).
The display will read “PROGRAMMING OK!”.