Filter
Top Products
9
Note: Numbers will be lost after a few hours if you disconnect your phone. Entering a new
number in the same location will automatically erase the previous number.
Note: You may store in multiple pauses during programming by pressing the “REDAIL”
button. Each pause is 2 seconds when inserted within the first digits and when inserted
after the 5 digits. WHen the number is dilled, the phone will halt at the inserted pause(s)
until you press “REDIAL” button to continue.
PROGRAMMING THE RINGER
Ringer Volume:
You can adjust the ringer volume of your CL1100 as high as 75 dB. The ringer volume
adjustment is located on the backside of the telephone. The settings are HI, LO, OFF (See
diagram 10)
. Batteries are required if you wish to increase the ringer level an additional 10
dB of gain, see page #6.
: Off
: Lo
: Hi
Ringer Style:
Your CL1100 Phone’s default setting for the ringer is set at 6. If you don’t like the ringer
style, you can choose a new one by changing the settings as follows:
DIAGRAM #7- Program button
DIAGRAM #8 – Memory buttons
DIAGRAM #9 – Telephone keypad
DIAGRAM #10 – Ringer volume switch