Filter
Top Products
Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company’s inside wiring associated with
a single line individual service may be extended by means of a certified
connector assembly (telephone extension cord). The customer should be
aware that compliance with the above conditions may not prevent degra-
dation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may give
the telecommunications company cause to request the user disconnect
the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
Caution: Users should not attempt to make such connections them-
selves, but should contact the appropriate electric inspection authority, or
electrician, as appropriate.
The Load Number (LN) assigned to each terminal device denotes the
percentage of total load to be connected to a telephone loop which is
used by the device to prevent overloading. The termination on a loop may
consist of any combination of devices subject only to the requirement that
the total of the load numbers of all the devices does not exceed 100.
REGULATORY COMPLIANCE
Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the FCC rules and the require-
ments adopted by the ACTA. On the bottom of this equipment is a label
that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to
the telephone company.
b) A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA. A compliant telephone cord and
modular plug, RJ11C USOC, is provided with this product. It is designed
to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
c) The REN is used to determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a telephone line may result
in the devices not ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed five (5.0). To be certain of
the number of devices that may be connected to a line, as determined by
the total RENs, contact the local telephone company. For products ap-
proved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g.,
03 is a REN of 0.3). For earlier products, the REN is separately shown on
the label.
d) If this telephone equipment causes harm to the telephone network,
the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn’t practi
-
cal, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
e) The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equipment. If
this happens the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
f) If trouble is experienced with this telephone equipment, for repair or war-
ranty information, please contact Clarity, 1-800-552-3368. If the equipment
is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the
problem is resolved.
g) This telephone equipment is not intended to be repaired and it contains no
repairable parts. Opening the equipment or any attempt to perform repairs
will void the warranty. For service or repairs, call 1-800-552-3368.
h) Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corporation
commission for information.
i) If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this telephone equipment does not
disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or a
qualified installer.
j) This telephone equipment is hearing aid compatible.
Customer-Owned Coin/Credit Card Phones:
To comply with state tariffs, the telephone company must be given notifica-
tion prior to connection. In some states, the state public utility commission,
public service commission or corporation commission must give prior ap-
proval of connection.
Part 15 of FCC Rules Information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Your equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation; if
this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, you
are encouraged to try to correct the interference by one of the following
measures:
1. Where it can be done safely, reorient the receiving television or
radio antenna.
2. To the extent possible, relocate the television, radio or other receiver
with respect to the telephone equipment. (This increases the separa-
tion between the telephone equipment and the receiver.)
3. Connect the telephone equipment into an outlet on a circuit different
from that to which the television, radio, or other receiver is connected.
4. Consult the dealer or an experienced Radio/TV Technician for help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority
to operate the equipment.
Industry Canada Technical Specifications
This product meets the applicable Industry Canada
technical specifications.
Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company’s inside wiring associated with
a single line individual service may be extended by means of a certified
connector assembly (telephone extension cord). The customer should
be aware that compliance with the above conditions may not prevent
degradation of service in some situations. Repairs to certified equipment
should be made by an authorized Canadian maintenance facility designated
by the supplier.
Any repairs or alterations made by the user to this equipment, or equip-
ment malfunctions, may give the telecommunications company cause
to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections them-
selves, but should contact the appropriate electrical inspection authority,
or electrician, as appropriate.
The Ringer Equivalence Number is an indication of the maximum number
of terminals allowed to be connected to a telephone interface. The termi-
nation on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed five.
(The term “IC:” before the certification/registration number only signifies
that the Industry Canada technical specifications were met.)
The party responsible for regulatory compliance:
Clarity, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Phone: 1-800-552-3368
WARRANTY & SERVICE
The following warranty and service information applies only to products
purchased and used in the U.S. and Canada. For warranty information in
other countries, please contact your local retailer or distributor.
Limited Warranty
Clarity, a division of Plantronics, Inc. (“Clarity”) warrants to the original
consumer purchaser that, except for limitations and exclusions set forth
below, this product shall be free from defects in materials and work-
manship for a period of one (1) year from the date of original purchase
(“Warranty Period”). The obligation of Clarity under this warranty shall
be at Clarity‘s option, without charge, of any part or unit that proves to be
defective in material or workmanship during the Warranty Period.
Exclusions from Warranty
This warranty applies only to defects in factory materials and factory
workmanship.
Any condition caused by accident, abuse, misuse or improper operation,
violation of instructions furnished by Clarity, destruction or alteration,
improper electrical voltages or currents, or repair or maintenance at-
tempted by anyone other than Clarity or an authorized service center, is
not a defect covered by this warranty. Telephone companies manufacture
different types of equipment and Clarity does not warrant that its equip-
ment is compatible with the equipment of a particular phone company.
Implied Warranties
Under state law, you may be entitled to the benefit of certain implied
warranties. These implied warranties will continue in force only during the
warranty period. Some states do allow limitations on how long an implied
warranty lasts, so the above limita-tion may not apply to you.
Incidental or Consequential Damages
Neither Clarity nor your retail dealer or selling distributors has any re-
sponsibility for any incidental or consequential damages including without
limitation, commercial loss or profit, or for any incidental expenses, ex-
penses, loss of time, or inconvenience. Some states do not allow exclusion
or limitation of incidental or consequential damage, so the above limitation
or exclusion may not apply to you.
Other Legal Rights
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
How to Obtain Warranty Service
To obtain warranty service, please prepay shipment and return the unit to
the appropriate facility listed below.
In the United States
Clarity Service Center
4289 Bonny Oaks Drive, Suite 106
Chattanooga, Tennessee 37406
Tel: (423) 622-7793 or (800) 426-3738
Fax: (423) 622-7646 or (800) 325-8871
In Canada
Plantronics Service Center
8112 Trans-Canada Hwy.
Ville St. Laurent, Que.
H4S 1M5 Canada
Tel: (800) 540-8363 (514) 956-8363
Fax: (514) 956-1825
Please use the original container, or pack the unit(s) in a sturdy carton
with sufficient packing material to prevent damage.
Include the following information:
1. A proof-of-purchase indicating model number and date
of purchase.
2. Bill-to address.
3. Ship-to address.
4. Number and description of units shipped.
5. Name and telephone number of person to call, should contact
be necessary.
6. Reason for return and description of the problem.
Damage occurring during shipment is deemed the responsibility of the
carrier, and claims should be made directly with the carrier.
Made in China • UG010406_C210_Rev H
©2005 Clarity, a Division of Plantronics, Inc. All rights reserved. Clarity,
Clarity Power, the amplification device, Clarity and the amplification
device combined, and Amplifying Your Life are trademarks or registered
trademarks of Plantronics, Inc.
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-552-3368
www.clarityproducts.com
3
4