Filter
Top Products
required. Check with the manufacturer of
the telephone equipment.
1.
Plug the coiled cord (2.5mm)
of
the
MHAl00
into your telephone's
headset icck.
2.
Plug the connector of the headset
into the 2.5mm jack of the
MHA100.
3.
The
MHA100
is
sound/voice acti-
vated. The unit will automatically
turn on and the
RED
LED
will
light up
when a call
is
made or received.
4.
Adjust the volume control to best suit
your hearing. For best results, set the
volume of your phone to minimum or
near minimum before adjusting the
voiume controls of the
MHA100.
I
I
Note:
The
RED
LED
will
also blink to
indicate the amplifier has reached its
maximum volume limit.
5.
The unit
will
turn
off
automaiically
I
ten
(I
0)
seconds after the phone
is
I
turned off or no sound
is
detected.
The
MHA100
will automatically turn
on when there
is
sound activity de-
tected or a button on the cell phone
r
is
pressed.
CAUTION:
If
the
MHAl00
does not
turn off after ten
(1
0)
seconds and your