Filter
Top Products
Troubleshooting
26
The phone does not ring when you
receive a call:
• Make sure the RINGER switch on the
handset and base are set to ON.
•Verify the AC Adapter is securely
plugged into AC outlet, the base and
the telephone.
•Verify the telephone line cord is
securely plugged into the wall jack
and the telephone.
• Make sure you are in the usable
range of the base station.
•You may have too many extensions
on your line. Try unplugging a
few devices.
Noise, Static, Interference or Other Calls
Heard while Using the Handset:
•Try changing channels.
• Make sure the base antenna is in an
upright position.
• Make sure you are in the usable
range of the base station.
The unit will not operate/no dial tone:
•Verify the TALK Button is lit.
•Verify the AC Adapter is securely
plugged into AC outlet, the base and
the telephone.
•Verify the telephone line cord is
securely plugged into the wall jack
and the telephone.
• Make sure the base antenna is in an
upright position.
• Make sure the handset battery is
fully charged.
•Verify the telephone is in the correct
dialing mode, tone (touch) or
pulse (rotary).
• Make sure you are in the usable
range of the base station.
• Reset the security code by placing the
handset in the base for 5-10 seconds.
PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 26