Cisco Systems OL-6030-01 IP Phone User Manual


  Open as PDF
of 6
 
2-5
System Manager’s Guide for Cisco MeetingPlace for Cisco IP Phone Release 4.2.5
OL-6030-01
Chapter 2 Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5
How to Install Cisco MeetingPlace for Cisco IP Phone Release4.2.5
Step 6 For the MeetingPlace User ID parameter, enter the information in Table 2-3.
Step 7 To add the new MeetingPlace User ID parameter, click Insert.
Step 8 For the MeetingPlace Password parameter, enter the following in Table 2-4:
Step 9 To add the new MeetingPlace Password parameter, click Insert and Close.
Step 10 To update the Cisco IP Phone Services Configuration window, complete one of the following tasks:
• If the service is new and you do not need to rebuild user subscriptions, click Update.
or
• If the service was modified after subscriptions existed, click Update Subscriptions to rebuild all
user subscriptions.
Note You must update subscriptions if you changed the Cisco MeetingPlace service URL, removed a phone
service parameter, or changed the name for a phone service parameter.
Table 2-3 MeetingPlace User ID Parameters
Field Task
Parameter Name Enter username.
Parameter Display Name Enter MeetingPlace User ID.
Parameter Description Enter MeetingPlace User ID.
Parameter is Required Check Parameter is Required.
Table 2-4 MeetingPlace Password Parameters
Field Task
Parameter Name Enter userpwd.
Parameter Display Name Enter MeetingPlace Password.
Parameter Description Enter MeetingPlace Password.
Parameter is Required Check Parameter is Required.
Parameter is a Password (mask contents) Check Parameter is a Password (mask
contents).
 previous