Filter
Top Products
2-13
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Adding Phones to the Cisco Unified Communications Manager Database
Related Topics
• Adding Phones with Auto-Registration, page 2-11
• Adding Phones with Cisco Unified Communications Manager Administration, page 2-13
• Adding Phones with BAT, page 2-13
Adding Phones with Cisco Unified Communications Manager Administration
You can add phones individually to the Cisco Unified Communications Manager database using
Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC
address for each phone.
For information about determining a MAC address, see Determining the MAC Address of a Cisco
Unified IP Phone, page 2-15.
After you have collected MAC addresses, in Cisco Unified Communications Manager Administration,
choose Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager,
refer to Cisco Unified Communications Manager Administration Guide and to Cisco Unified
Communications Manager System Guide.
Related Topics
• Adding Phones with Auto-Registration, page 2-11
• Adding Phones with Auto-Registration and TAPS, page 2-12
• Adding Phones with BAT, page 2-13
Adding Phones with BAT
Cisco Unified Communications Bulk Administration Tool (BAT), which is a menu option in Cisco
Unified Communications Manager Administration, enables you to perform batch operations, which
includes registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to obtain the appropriate
MAC address for each phone.
For information about determining a MAC address, see Determining the MAC Address of a Cisco
Unified IP Phone, page 2-15.
To add a phone to the Cisco Unified Communications Manager, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone
Template.
Step 2 Click Add New.
Step 3 Choose a Phone Type and click Next.
Step 4 Enter the details of phone specific parameters like Device Pool, Phone Button Template, Device Security
Profile and so on.
Step 5 Click Save.