Filter
Top Products
2-12
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23089-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address of a Cisco Unified IP Phone
Determining the MAC Address of a Cisco Unified IP Phone
Several of the procedures that are described in this manual require you to determine the MAC address
of a Cisco Unified IP Phone. You can determine the MAC address for a phone in any of these ways:
• If the phone is registered with Cisco Unified CM, press the Application Menu button, then choose
Settings > Model Information and look at the MAC Address field.
By default, the Application Menu button is line button 24 (the top left line button).
• If the phone is not registered with Cisco Unified CM, press the Settings softkey, the choose Model
Information and look at the MAC Address field.
This softkey appears only when the phone is not registered.
• Look at the MAC label on the back of the phone.
• Display the web page for the phone and click the Device Information hyperlink.
For information about accessing the web page, see the Accessing the Web Page for a Phone,
page 8-2.