Filter
Top Products
3-7
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP)
OL-18988-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Mounting the Phone to the Wall
Figure 3-2 Connecting a Cable Lock to the Cisco Unified IP Phone 7931G
Mounting the Phone to the Wall
You can mount the Cisco Unified IP Phone on the wall using special brackets that are available in a
Cisco Unified IP Phone wall mount kit. (Wall mount kits must be ordered separately from the phones.)
You can also attach the phone to the will without a wall mount kit. In either case, you need the following
tools and parts:
• Screwdriver
• Screws to secure the Cisco Unified IP Phone to the wall (included with the wall mount kit
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook
from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip
on which the handset catches when the phone is vertical. For an illustrated procedure, refer to Installing
the Universal Wall Mount Kit for the Cisco Unified IP Phone at
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html
182098