Filter
Top Products
10-3
Cisco Unified Communications Manager Security Guide
OL-18348-01
Chapter 10 Phone Hardening
Where to Find More Information
Step 3 To open the Phone Configuration window for the device, click the device name.
Step 4 Locate the following product-specific parameters:
• PC Port
• Settings Access
• Gratuitous ARP
• PC Voice VLAN Access
• Web Access Setting
Tip To review information on these settings, click the question mark that displays next to the
parameters in the Phone Configuration window.
Step 5 From the drop-down list box for each parameter that you want to disable, choose Disabled. To disable
the speakerphone or speakerphone and headset, check the corresponding check boxes.
Step 6 Click Save.
Step 7 Click Reset.
Additional Information
See the “Related Topics” section on page 10-3.
Where to Find More Information
Related Topics
• Disabling the Gratuitous ARP Setting, page 10-1
• Disabling Web Access Setting, page 10-1
• Disabling the PC Voice VLAN Access Setting, page 10-2
• Disabling the Setting Access Setting, page 10-2
• Disabling the PC Port Setting, page 10-2
• Configuring Phone Hardening, page 10-2
Related Cisco Documentation
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager