Filter
Top Products
34-2
Cisco Unified Presence Administration Guide
OL-12727-01
Chapter 34 IP Phone Messenger Status
Logging Out an IPPM End User
Note You can delete multiple records from the database by checking the check boxes next to the
appropriate record and clicking Delete Selected. You can delete all configurable records for this
selection by clicking Select All and then clicking Delete Selected.
Step 4 From the list of records that display, click the link for the record that you want to view.
Note To reverse the sort order, click the up or down arrow, if available, in the list header.
The window displays the item that you choose.
Additional Information
See the “Related Topics” section on page 34-3.
Logging Out an IPPM End User
This section describes how log out an IPPM end user.
Procedure
Step 1 To log out an IPPM end user, find the IPPM end user by using the procedure in the “Finding IP Phone
Messenger End-User Status” section on page 34-1.
Step 2 Choose the end users that you want to log out or click Select All.
Step 3 Click Logout.
You get prompted to confirm that you want to log out the users.
Step 4 Click OK to log out the users or click Cancel to exit without logging out the users.
Sending a Broadcast Message
This section describes how to send a broadcast message to one or more IPPM end users.
Procedure
Step 1 To send a broadcast message to one or more IPPM end users, find the IPPM end users by following the
procedure in the “Finding IP Phone Messenger End-User Status” section on page 34-1.
Step 2 Choose the end users to whom you want to send a broadcast message or click Select All.
Step 3 In the Message box, enter the broadcast message text.
Step 4 Click Broadcast.
You get prompted to confirm that you want to send a broadcast message.