Filter
Top Products
Components Used
The information in this document is based on these software and hardware versions:
ATA 186 with version 2.12•
Cisco 3640 with Cisco IOS® Software Release 12.1 as a gateway•
Cisco 2600 with Cisco IOS Software Release 12.2 as a gatekeeper•
The information presented in this document was created from devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If you are working in a live
network, ensure that you understand the potential impact of any command before using it.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Network Diagram
This document uses this network setup:
Registering the ATA 186 with the Gatekeeper
Follow these instructions to register the ATA 186 with the gatekeeper.
In a web browser Address or Location field, type the URL http://ip_address_of_ata/dev to access the
ATA 186 configuration screen, where ip_address_of_ata is the IP address of the ATA 186 you are
registering.
In this example, the URL is http://172.16.104.117/dev. The Cisco ATA 186 Configuration window
appears.
Note: The underlined fields are the relevant configured parameters for this scenario.
1.