Filter
Top Products
4-6
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Network Configuration Menu
Default Router 1
Default Router 2
Default Router 3
Default Router 4
Default Router 5
Default router used by the phone (Default Router 1) and
optional backup routers (Default Router 2–5.)
1. Set the DHCP Enabled option to No.
2. Scroll to the appropriate Default Router
option, press the Edit softkey, and then
enter a new router IP address.
3. Press the Validate softkey.
4. Repeat Steps 3 and 4 as needed to assign
backup routers.
5. Press the Save softkey.
DNS Server 1
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
Primary Domain Name System (DNS) server (DNS Server
1) and optional backup DNS servers (DNS Server 2–5) used
by the phone.
1. Scroll to the appropriate DNS Server
option, press the Edit softkey, and then
enter a new DNS server IP address.
2. Press the Validate softkey.
3. Repeat Steps 3 and 4 as needed to assign
backup DNS servers.
4. Press the Save softkey.
Operational
VLAN Id
Auxiliary Virtual Local Area Network (VLAN) configured
on a Cisco Catalyst switch in which the phone is a member.
If the phone has not received an auxiliary VLAN, this
option indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative
VLAN are configured, this option is blank.
The phone obtains its Operational VLAN Id
via Cisco Discovery Protocol (CDP) from
the switch to which the phone is attached. To
assign a VLAN ID manually, use the Admin
VLAN Id option.
Admin. VLAN Id Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary VLAN
from the switch, ignored otherwise.
1. Scroll to the Admin. VLAN Id option,
press the Edit softkey, and then enter a
new Admin VLAN setting.
2. Press the Validate softkey and then
press the Save softkey.
Call Manager 1
Call Manager 2
Call Manager 3
Call Manager 4
Call Manager 5
Cisco Unified Communications Manager servers that are
available for processing calls from this phone, in prioritized
order.
For more information, see the “Cisco Unified
Communications Manager Options” section on page 4-10.
You configure an SRST router address in the
Cisco Unified Communications Manager
Administration SRST Reference
Configuration page (choose System >
SRST). You configure an SRST reference in
the Device Pool Configuration page (choose
System > Device Pool).
URL Information URL of the help text that displays on the phone. From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
URL Directories URL of the server from which the phone obtains directory
information.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
URL Messages URL of the server from which the phone obtains message
services.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change