Cisco Systems 1000 Two-Way Radio User Manual


 
CHAPTER
1-1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-15
1
Overview: Cisco ASR 1000 Series Aggregation
Services Routers SIPs
This chapter describes the SPA interface processors (SIPs) that are supported on the Cisco ASR 1000
Series Aggregation Services Routers and contains the following sections:
SIP Summary, page 1-1
SPA Interface Addresses on SIPs, page 1-3
Identifying Slots and Subslots for SIPs and SPAs, page 1-3
Cisco ASR 1000 Series SPA Interface Processor Overview, page 1-7
SIP Summary
Summary descriptions of the SIPs that are supported on the Cisco ASR 1000 Series Routers are shown
in Table 1-1.
Note The Description column indicates the aggregate bandwidth supported by the SIP across all subslots, and
not per SPA subslot.
Table 1-1 SIP Summary
SIP Product Number Description
Maximum Number
of SPAs
Minimum Cisco IOS
Release
Cisco ASR 1000 Series
SIP10G
ASR-1000-SIP10 10 Gbps SPA interface processor 4 Cisco IOS XE
Release 2.2
Cisco ASR 1000 Series
SIP40G
ASR-1000-SIP40 40 Gbps SPA interface processor 4
1
1. The Cisco ASR1000-SIP40 carrier card supports four half-height SPAs, two full-height SPAs, or a combination of two half-height and one full-height
SPAs. Double-wide SPAs are not supported.
Cisco IOS XE
Release 3.1S