Cingular T68m Telephone User Manual


 
2
Quick Start
Set Up
1. Plug the power supply into the back of the FastForward
device and insert into an electrical outlet. WARNING: Do
not plug the FastForward power connector directly into
your handset. This could potentially damage your handset.
2. Place the device on a convenient flat surface with good
wireless coverage.
3. Create a new phone book entry in your wireless phone with
the name “Cf1” see page 7 for complete instructions.
4. In the Cf1 entry location, store the phone number for
the location to which you would like incoming wireless
calls forwarded.
5. Place the Cf Selector Switch, located on the bottom of the
device, into the Cf1 position.
6. The phone must be turned on for call forwarding to work.
3
To Start Call Forwarding
1.
Simply insert your wireless phone into the FastForward device.
2. The Forward indicator on the device will illuminate indicating
your incoming wireless calls are now forwarded. In order for
the FastForward device to work properly, the handset should
be turned on and not engaged with an active call when placed
on the FastForward device.
3. An added bonus is that your wireless phone's battery will be
charged while it is in the device.
NOTE: Any unanswered FastForward call will be treated as a normal landline
call is treated today.
To Cancel Call Forwarding
1. With your wireless phone in the FastForward device, press the
Cancel button on the front of the FastForward device. Your
wireless handset should be turned on and not engaged with
an active call while canceling call forwarding.
2. The Forward indicator will extinguish after several seconds.
3. You may now remove your wireless phone.
It may be necessary to tilt your phone when inserting
or removing from the FastForward device.
3183 Sony Ericsson.qxd 10/16/03 2:44 PM Page 2