• The FastForward device will rapidly flash the indicator and
sound a high-low alert for 3 seconds if the wireless phone is
removed without pressing the Cancel button. This alerts you
that the phone is still call forwarded. Simply replace the phone
in the device, press the Cancel button, and the Forward indicator
will extinguish, indicating that call forwarding is deactivated and
you may remove the wireless phone.
• The FastForward device will slowly flash the indicator and
sound a low alert for 5 seconds if there is no Cf1, Cf2, or Cf3
programmed into the wireless phone’s address book – verify
the Cf programming of the wireless phone and verify the position
of the Cf switch on the bottom of the device.
• The FastForward device will flash the indicator in an “On, On,
Off” pattern and sound a high alert for 5 seconds if there is an
issue with the device communicating with the wireless phone or
the wireless network – verify that the wireless phone is turned
on, there is good coverage, there is not an active call, and try
re-inserting the wireless phone.
!
17
!
!
16
!
Warning Alerts
FastForward provides visual and audio warnings to alert you to
conditions requiring your attention.
• The indicator on the front provides visual warning while an
internal speaker provides audio indications.
3183 Sony Ericsson.qxd 10/16/03 2:44 PM Page 16