Filter
Top Products
3
Step 4
Place intercom in frame by inserting top section first,
then snapping the lower section into place.
Step 3
Place the frame in the hole
and tighten screws.
NOTE: Place frame in wall so
that the two small slots are on
the top and the larger single
slot is on the bottom.
Step 2
Insert a screw into each
hole in the frame and attach
the fasteners. Tighten screw
only 1/4" into the fastener.
Step 1
Cut a hole in the wall measuring 6 1/8" wide by
4 1/2" high.
6 1/8"
4 1/2"
Choose mounting locations where both intercoms will
work when tested.
NOTES:
• The wall location should be clear of beams and
other obstructions inside the wall.
• Do not mount intercoms within 6' of each other.
• Do not mount intercom near any electrical wiring or
electrical devices.
Installation