Filter
Top Products
27
1
Names of Parts and Their Functions
t Speaker
Sounds such as the alarm come out of the speaker. Sound does not come out
of the speaker when earphones or headphones are connected to the head-
phone jack.
y Program buttons
Pushing the program buttons starts the program assigned to that button. The
four default settings are, from the upper left, Menu [
], Calendar [ ],
Contacts [
], and Inbox [ ].
u Microphone (MIC)
Direct your voice here when recording on the Pocket Word or Memo screen.
i Infrared communication port
Used for data communications by the IrDA interface. (See page 91)
o Battery pack cover
This is the cover for the battery pack. Be sure to keep the battery pack cover
locked.
!0 UP/DOWN button (
)
Moves the cursor and similar items up and down on the computer screen.
(See page 29)
!1 Action button
Operates as the Enter key on the computer. Also, it has several functions when
the Cursor button r is pressed at the same time. (See page 29)
!2 Reset switch
This switch resets the Rugged PDA, similar to turning off and on the power
switch. Reset the Rugged PDA when some abnormality occurs, such as if the
buttons or tap operations stop working. (See page 97)
!3 Headphone jack (
)
You can attach commercially available earphones or headphones (3.5 mm dia)
to the headphone jack.
Remove the rubber cover to use it.
!4 Strap hole
You can attach a commercially available strap.
!5 Eject button
Use the eject button to remove CF (Compact Flash) card.
!6 SD card slot
You can insert either one SD card or one multimedia card.
!7 CF card slot
You can insert a CF (Compact Flash) card.
!8 Stylus holder
The stylus is stored here.
IT-10_1/25-39-E.p65 06.6.15, 6:40 PM27