Filter
Top Products
135
7.9.3 Setting Up WIN.INI File
The following parameters must be set in the [IrDA.COM2] section of the WIN.INI file. If these
parameters are not specified or if invalid parameters are set, communication will be performed
according to the default values.
Setup example
[IrDA.COM2]
IrDA=ON
MaxBaudRate=115200
SizeWindow=1
SizeData=1024
DisconnectThresholdTime=40
MaxTurnAroundTime=500
MinTurnAroundTime=10000
NumBOF=0
DeviceNickName=devicenickname
DeviceName=devicename
DiscoverCount=0
ServiceType=7
Each item has the following definition:
IrDA
Sets to the COM port irrespective of whether IrDA protocol is used.
Parameter
ON COM port uses IrDA protocol.
OFF (default) COM port does not use IrDA protocol (it uses direct serial protocol).