Filter
Top Products
PaIRInG The hanDseT WITh YoUR Phone
Note: Your device must be Bluetooth enabled to work with the Handset.
1. Refer to your cell phone manual for instructions on how to use the Bluetooth
pairing function in your phone.
2. Push and hold the silver button on the Handset. After 5 seconds you will hear a
high-tone beep, and the blue LED Indicator light on the Retro Handset will blink
briefly. Continue holding the silver button until you hear a low-tone beep and the
blue LED illuminates solid blue. The Handset is now in pairing mode.
3. Follow your cell phone’s instruction manual to pair your cell phone with a
Bluetooth device and initiate its pairing process.
4. Your cell phone should scan for local Bluetooth devices and should locate the
Handset "H680" after 10-20 seconds.
5. Your cell phone will then prompt you to enter a PIN number. Enter "0000".
6. Complete the Bluetooth pairing by following your cell phone’s instructions.
7. Now you will be able to place a call using your cell phone's keypad, internal
phonebook, or voice dial and use the Off The Hook Handset in place of your cell
phone’s handset.
Note: If you power-off your cell phone, you may need to reconnect.
7