Filter
Top Products
8
BT Synergy 3105 – Edition 4 – 11.11.03 – 5672
If you have purchased the
BT Synergy 3105 with multiple
handsets
1. Connect the mains power adaptor to the charger(s) and
switch on. Use the power supply with the red plastic end.
2. Insert the batteries and charge the handset(s) for at least
16 hours.
Your BT Synergy 3005 additional handsets come
pre-registered to the base as SYNERGY HS2, SYNERGY
HS3 and SYNERGY HS4. This is shown on the display.
Your BT Synergy 3105 handset is now ready for use
..
Attaching the belt clip (optional)
Getting started
Range indicator
The symbol on your handset
display indicates when you are in
range of the base. If the symbol
flashes and you hear a warning
beep, you are out of range and will
need to move closer to the base.
Keep the charger connected to the
mains power at all times.
Helpline
If you have any difficulties setting
up your BT Synergy 3105, please
call the BT Synergy Helpline on
08706 058 047.
SLOT
5672 BT Synergy 3105 UG [4] 11/11/03 3:46 PM Page 8